TEAM shoOFF! racks can be used to hold surfboards, snowboards and wakeboards.


MADE IN USA - RECYCLED PRODUCT
pol·y·car·bon·ate [pol-ee-kahr-buh-neyt] n. A class of thermoplastics characterized by its high-impact strength, light weight, and flexibility. It is a shatter-resistant "bullet-proof" substitute for glass used to make MOTOCYCLE HELMETS, BANK TELLER WINDOWS and WINDSHIELDS FOR MILITARY VEHICLES AND AIRCRAFT. You can mount your heaviest board and know it will be safe and secure.

Mounting Instructions
INSTALLATION IS EASY
Follow these helpful hints when attaching racks to wall. IMPORTANT! RACKS MUST BE ATTACHED TO STUDS IN WALL (Studs are normally 16" apart (mount snow/wakeboards - 32"apart)(mount surfboards 48"or 64"apart) (80" for longboards/guns).

MARK THE STUD POINTS
1] Determine approximate location of either left or right side rack, find closest STUD.
Attach rack to this stud by drilling a 3/16" hole in wall and securing with BOLT.
[Be sure to slide WASHER on BOLT before securing] DO NOT OVER TIGHTEN!! Rack should be able to move with slight pressure. 2] Place BOARD in first rack and locate height of other rack by sliding rack up or down the marked stud line until LEVEL. MARK the position and secure other rack. DO NOT OVER TIGHTEN

3] NOW YOU'RE a member of

TEAM shoOFF!
Three colors:
Amber Clear
Water Clear
Obsidian Black.